如何配置FortiGate为pptp客户端

描述:
该文档描述如何将FortiGate设置为pptp客户端。该配置需要在命令行下设置。
该例中，FG300B 和FG110C分别作为pptp的服务器端和客户端
FG310B内网用户通过pptp链接访问FG110C网络用户

配置:
1.FG110C 配置为PPTP服务器
config vpn pptp
set status enable
set eip 1.1.10.20
set sip 1.1.10.1
set usrgrp "pptp_group"
end

2.FG310B配置一物理接口作为PPTP拨号接口
FGT300B

config system interface
edit "port10"
set vdom "root"
set ip 192.168.72.122 255.255.255.0
set allowaccess ping snmp telnet
set pptp-client enable             启用pptp客户端
set type physical
set pptp-user "pptp"               pptp用户名
set pptp-password pptp             pptp密码
set pptp-server-ip 192.168.72.1   远程pptp服务器地址
end
end

查看pptp客户端中路由表
FGT300B# get router info routing-table all

Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default

S*      0.0.0.0/0 [10/0] via 192.168.118.1, port1
C       1.1.10.1/32 is directly connected, ppp0
C       1.1.10.2/32 is directly connected, ppp0
C       10.0.0.0/24 is directly connected, swtich
S       10.0.0.200/32 [10/0] is directly connected, todesktop, [0/50]
S       10.0.2.0/24 [10/0] is directly connected, todesktop, [0/50]
C       10.11.0.0/24 is directly connected, vpn
C       15.15.15.15/32 is directly connected, ospf1
S       172.16.1.0/24 [10/0] via 10.0.0.12, swtich, [0/50]
C       172.116.1.0/24 is directly connected, dilookup
S       192.168.8.0/32 [10/0] is directly connected, todesktop, [0/50]
C       192.168.72.0/24 is directly connected, port10
C       192.168.118.0/24 is directly connected, port1

> 客户注册 > 产品注册

> 服务注册 > 硬件报修

飞塔中国增值服务中心热线：
400-600-5255
(86)10-62965255
E-mail:
service_china@fortinet.com